ARRI Complete Wireless Video Basic Set

£7,164.00 Ex. VAT £8,596.80 Inc. Vat

One Wireless Video Transmitter WVT-1 Pro Set, one Wireless Video Receiver WVR-1 Basic Set and a case that fits one WVT-1, four WVR-1, cables and accessories.

Compare

The ARRI Complete Wireless Video Set includes one WVT-1 receiver, and one WVR-1 Receiver, providing wireless video and audio transmission from your camera to the paired receiver. The ARRI wireless video system provides real-time, uncompressed wireless transmission for ARRI or third-party cameras up to approximately 2000′ with under 1 ms of delay. Up to four WVR-1 Receivers may be paired with each stand-alone WVT-1 transmitter. The included WVR-1 Receiver may also be paired with an ARRI ALEXA SXT W camera’s internal transmitter (available separately). Dual-channel audio, timecode, and a REC flag function are included in the 128-bit AES-encrypted signal. The WVR-1 and WVT-1’s 10-bit output is compatible with HDR monitoring.

Designed for daily use on professional sets, each WVR-1 and WVT-1 features a rugged, water-resistant and dust-proof design with protective connector collars. The receiver accepts power voltages ranging from 10.5 to 34V, suiting them for use with a wide range of batteries. With an inclusive operating temperature of -4 to 113°F, the ARRI wireless video system is suitable for a variety of locations.

Seven antennas, three camera-to-transmitter power cables (including D-tap), one RPS-1 power supply, a short BNC cable, and one USB cable (for system updates) are included with this ARRI Complete Wireless Video Set. One MIA-1 interface adapter, a 3/8″-16 threaded stud, and an L-bracket are mounting options included with the set. Compatible battery options include Gold Mount, V-Mount, and Sony L-series (battery plates available separately). The included hard-shell case features custom-cut foam, and holds up to one transmitter, four receivers, and their accompanying accessories and cables.

ARRI WVT-1 Wireless Video Transmitter

The stand-alone ARRI WVT-1 Transmitter provides uncompressed wireless transmission for ARRI or third-party cameras. The WVT-1 pairs with up to four ARRI WVR-1 receivers, or with the Transvideo Starlite ARRI-WFS monitor. With a range of up to approximately 2000′, the WVT-1 offers real-time, uncompressed transmission with less than 1 ms of delay. Dual-channel audio, timecode, and a REC flag function are included in the 128-bit AES–encrypted signal. The WVT-1’s 10-bit output is compatible with HDR monitoring.

Designed for daily use on professional sets, the robust WVT-1 Transmitter’s input voltage is compatible with a wide range of batteries. The ARRI wireless video system is suitable for a variety of locations with an inclusive operating temperature of -4 to 113°F.

The WVT-1 Transmitter features a water-resistant and dustproof aluminum housing with collared antenna and cable ports for increased durability. This transmitter includes an adapter for mounting to a standard 3/8″-16 stud, and is compatible with additional mounting options (not included).

ARRI WVR-1 Wireless Video Receiver

The ARRI WVR-1 Wireless Video Receiver accepts video transmission from the ALEXA SXT W internal transmitter, or from the stand-alone ARRI WVT-1 transmitter. The ARRI wireless video system provides real-time, uncompressed wireless transmission for ARRI or third-party cameras up to approximately 2000′ with under 1 ms of delay. Up to four WVR-1 Receivers may be paired with each ALEXA SXT W internal transmitter, or stand-alone WVT-1 transmitter (available separately). Dual-channel audio, timecode, and a REC flag function are included in the 128-bit AES-encrypted signal. The WVR-1’s 10-bit output is compatible with HDR monitoring.

Designed for daily use on professional sets, the WVR-1 features a rugged, water-resistant and dust-proof design with protective connector collars. This receiver accepts power voltages ranging from 10.5 to 34V, suiting it for use with a wide range of batteries. With an inclusive operating temperature of -4 to 113°F, the ARRI wireless video system is suitable for a variety of locations.

Five antennas, an RPS-1 power supply, and a USB cable are included with this receiver. The included MIA-1 interface adapter mounts the WVR-1 to a 19mm rod or to a 5/8″ light stud. Compatible battery options include Gold Mount, V-Mount, and Sony L-series (battery plates available separately).

Note:

Separately available battery-mounting plates are not included

ARRI 3/8″ Thread Adapter for ARRI Wireless Tx or Rx

This 3/8″ Thread Adapter from ARRI provides a mounting option for an ARRI wireless system WVR-1 Receiver or WVT-1 Transmitter. Use this threaded adapter to mount the wireless component to an industry-standard 3/8″-16 stud.

ARRI WVS USB Cable for Software Updates

The ARRI WVS USB Cable is a standard USB cable used for updating system software in select ARRI camera items. It can be used with the ARRI ALEXA SXTW camera’s video transmitter, and with the Wireless Video System (WVS) transmitter (WVT-1) and receiver (WVR-1).

ARRI 2-Pin LEMO-Type to 3-Pin Fischer Cable (19″)

The ARRI 2-Pin LEMO-Type to 3-Pin Fischer Cable (19″) is designed to power an ARRI Wireless Video System WVT-1 transmitter, WVR-1 receiver, or UMC-4 controller. This cable provides power but does not support a run/stop function.

ARRI HDTV BNC Cable (12″)

This HDTV BNC Cable (12″) from ARRI features HDTV BNC connectors for outputting HD video from a wireless video receiver like the ARRI WVR-1 to a monitor. This compact cable’s 12″ length is suitable for use with an on-board camera monitor.

ARRI MIA-1 Multi-Interface Adapter for ARRI Wireless Tx or Rx

This MIA-1 Multi Interface Adapter from ARRI provides two mounting options for an ARRI wireless system WVR-1 Receiver or WVT-1 Transmitter. Use this adapter to mount the wireless component to a 5/8″ light stud or to a single, standard 19mm support rod.

ARRI RPS-1 Receiver Power Supply

Use the ARRI RPS-1 Receiver Power Supply in lieu of batteries to provide continuous power to the Wireless Video Receiver WVR-1. It may also be used to power the WVT-1 Wireless Video Transmitter, or the UMC-4 Universal Motor Controller. This power supply includes international wall socket adapters.

ARRI Wireless Video System Case

The ARRI Case for the Wireless Video System is designed to hold a complete set of components. Store and transport one WVT-1 Transmitter, up to four WVR-1 Receivers, corresponding cables, and accessories.

Additional information

Brand

Arri

MPN

KK.0015011

Key Features

  • Up to 2000′ uncompressed, real-time transmission with under 1 ms delay
  • Capable of multicasting to four WVR-1 receivers or the Transvideo Starlite ARRI-WFS monitor
  • 128-bit AES-encrypted signal with embedded 2-channel audio, timecode, and a REC flag function
  • 10-bit output is compatible with HDR monitoring
  • Rugged water-resistant, dustproof housing with 3/8″-16 threaded adapter
  • Input voltage of 10.5 to 34V is compatible with a wide range of batteries
  • Collared antenna and cable ports for added durability

What's Included

K2.0014051 1x Wireless Video Transmitter WVT-1 device

K2.0014893 1x 3/8in Thread Adapter

K2.0014216 1x USB Cable WVS

K2.0014331 1x Cable PWR OUT/12V (2p) – RS/PWR IN (3p) (0.5m/1.6ft)

K2.0001637 1x Cable RS – RS/PWR IN (0.5m/1.6ft)

K2.0002668 1x Cable D-Tap – RS/PWR IN (0.5m/1.6ft)

K2.0001967 1x L-Bracket

K2.0014991 1x HDTV BNC Cable (0.3m/1ft)

K2.0014053 1x Wireless Video Receiver WVR-1 device

K2.0014323 1x Multi Interface Adapter MIA-1

K2.0014774 1x Receiver Power Supply RPS-1

K2.0015006 1x Wireless Video System Case

K2.0014568 7x Antenna Video/WiFi/ECS

Note: Battery Adapter Plates for WVR-1 are not included and can be ordered separately.

X

Main Menu

ARRI Complete Wireless Video Basic Set

£7,164.00 Ex. VAT £8,596.80 Inc. Vat

Add to Cart