No products in the cart.
Roll over image to zoom in
Click to open expanded view
The ARRI L-Series is an LED Fresnel fixture so close to its conventional counterpart in function and performance that it creates a previously unattainable opportunity: like-for-like replacement of traditional Fresnels with LED-based units.
Light Engine 2
Compared with previous L7-C models, the LE2 range are now 25% brighter.
The L7-C is the first LED fixture to truly incorporate the Fresnel characteristics of continuous focusability from spot to flood and a smooth, homogenous light field. The L-Series takes full advantage of LED technology and allows for complete control over the color and intensity of light. Light emitted from the L7 is specifically calibrated for optimal reproduction on broadcast and digital cinema cameras, ensuring pleasing skin tones and vividly rendered colors. Constructed to be robust and ergonomic, the L7-C meets the quality and design standard for which ARRI is known.
Whereas other LED fixtures have taken forms that demand sacrifices in the quality of lighting designs, the L-Series is unique in that it fits perfectly into established working practices. This means that lighting designers will not have to adapt their creative techniques, nor will studios have to change their operating procedures; conventional Fresnels can be exchanged for L7 Fresnels on a like-for-like basis, achieving substantial and immediate cost savings with minimal disruption.
Running costs is where the similarity to tungsten Fresnels ends. L-Series fixtures reduce electricity usage, which equates to dramatic cost savings in terms of power draw. Further savings are brought about by the exceptional life span of the LED light engine, which lasts around 200 times longer than a conventional tungsten lamp; the reduced maintenance and minimized power distribution will combine with other cost-saving attributes such as built-in dimming to effect a rapid return on investment.
The L-Series also facilitates energy savings outside the studio, as versatile location lighting setups can be achieved with available power, meaning no large generators and no expensive fuel bills.
Color temperature, tint and hue can be continuously adjusted from 2800 K to 10,000 K, between full plus or minus green and RGBW colors.
|Optical System||Focusable Fresnel|
|Lens Diameter||175 mm / 7 inch|
|Beam Angle||15° – 50° (Half Peak Angle)|
|Mounting||28 mm Spigot (Junior Pin)|
|Tilt Angle||+/- 90°|
|Power Supply Range||100 – 250V AC, 50-60Hz|
|Power Consumption||160 W Nominal, 220 W Maximum|
|White Light||2800 K – 10.000 K Continuously Variable Correlated Colour Temperature|
|Coloured Light||Full RGB+W Colour Gamut with Hue and Saturation Control|
|Colour Temperature Tolerance||+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)|
|Colour Rendition CRI||94 (3200K to 6500K)|
|Green-Magenta Adjustment||Continuously Adjustable (Full Minusgreen to Full Plusgreen)|
|Dimming||0 -100% Continuous|
|Control||5-Pin DMX In and Through, Optional On-Board Controller, Mini-USB|
|Remote Device Management (RDM||) DMX Setup, Hour Counter and Standard RDM Commands|
|Mini-USB Interface||DMX Setup, Fixture Status and Firmware Upgrade Through PC Software|
|Ambient Temperature Operation||Active: -20 – 45° C (-4 – 113° F)|
|Protection Class||IP 20|
|Estimated LED Lifetime (L70)||50,000 hours|
|Estimated Color Shift Over Lifetime||+/- 5% K|
|Certifications||CE, GS, FCC, cNRTL, CB, ISO9001:2000|