Shure PSM300 System With Earphones
- Brand: SHURE
£776.40 £647.00
Order Now - Usually delivered in 2-4 weeks
Shure PSM300 System With Earphones
Shure PSM 300 Wireless In-Ear Monitoring Set with SE112 Earphones (P3TUKR112GR-K3E).
P3T Wireless Transmitter
Dependable wireless transmission and 24-bit digital audio deliver a superior personal monitoring mix for every performance. Send 2 channels of audio to a bodypack receiver up to 300 feet away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. The rugged, half rack transmitter features easy front-panel controls including one-touch sync and input level knob to enable quick setup and easy operation. Rear-panel balanced inputs and loop outputs provide versatile connectivity to audio sources and other P3T units.
- Single channel, half-rack transmitter with included rack mount kit
- Sends a stereo or mono mix wirelessly to performers onstage
- Rock-solid wireless connection to P3R receiver over 300 ft (90 m) range
- One-touch IR sync instantly links transmitter to receiver
- Up to 30 mW output power (region dependent)
- 24 MHz tuning range (region dependent)
- ¼” (6.3 mm) TRS balanced inputs and loop outputs
- High-contrast LCD menu with detailed L/R audio output meters
- Detachable antenna
- External power supply
- Selectable line/aux level
P3R Wireless Bodypack Receiver
Component Specifications P3R Wireless Bodypack Receiver The P3R is a wireless stereo bodypack receiver for use with the PSM®300 Personal Monitor System. With 24-bit digital audio clarity and up to 300 ft of range (90 m), the P3R offers reliable wireless freedom that covers every corner of the stage. Simply connect a set of earphones and adjust the controls to create a wireless personal mix. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. Use MixMode® technology to customize the mono blend from two channels of audio, or select stereo mode and adjust the left/right balance as desired. One-touch frequency scan and automatic frequency selection enables quick setup and connection to a P3T transmitter via IR sync.
- Slim, lightweight, durable form factor
- Frequency scan and IR sync quickly finds and assigns a clean channel
- MixMode® technology enables adjustment of two independent monitoring mix levels
- Stereo mode enables adjustment of left/right balance
- Easy to adjust volume knob and mix control
- 2 AA batteries provide up to 6 hours of continuous operation
- Power save mode preserves battery life when earphones are not connected
- Power and battery status LED
SE112-GR
SE112 Professional Sound Isolating™ Earphones provide great sound and durable build quality through a single, dynamic driver. Discrete, secure design includes a fixed, 3.5 mm (1/8”) audio cable that can be worn over the ears or hanging down based on preference. Sound Isolating technology blocks up to 37 dB of outside noise. Includes a carrying pouch and fit kit with selection of sleeves for custom fit
- Single dynamic driver delivers great sound performance in a discrete, durable design.
- Sound Isolating™ design featuring fit kit with a variety of sleeves blocks up to 37 dB of outside noise so you can hear the details of your music.
- Fixed cable design allows for earphones to be worn over the ear or hanging down for long-wearing comfort.
- Includes a carrying pouch and fit kit with selection of sleeves.
- Designed to withstand the rigors of live performance with two-year warranty.
Specification
PSM300 System Specifications | |
RF Carrier Range | 488–937.5 MHz |
(Varies by region, see frequency range and output power table) | |
Compatible Frequencies Per band | up to 15 |
Tuning Bandwidth | 24 MHz maximum (Note: varies by region) |
Operating Range Environment dependent | 90 m (300 ft) |
Audio Frequency Response | 38 Hz–15 kHz |
Signal-to-Noise Ratio A-weighted | 90 dB (typical) |
Total Harmonic Distortion ref. ±34 kHz deviation @1 kHz | <0.5% (typical) |
Companding | Patented Shure Audio Reference Companding |
Spurious Rejection ref. 12 dB SINAD | >80 dB (typical) |
Frequency Stability | ±2.5 ppm |
MPX Pilot Tone | 19 kHz (±1 Hz) |
Modulation | FM*, MPX Stereo |
(ref. ±34 kHz deviation @ 1 kHz) | |
Operating Temperature | -18 °C (0 °F) to +63 °C (145 °F |
P3T Wireless Transmitter | |
RF Output Power | 10, 20, 30 mW |
Note: varies by region | |
RF Output Impedance | 50 Ω (typical) |
Net Weight | 783 g (27.6oz.) |
Dimensions | 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.), H × W × D |
Power Requirements | 12–15 V DC, 260 mA maximum |
Audio Input | |
Connector Type | 6.35 mm (1/4″) TRS |
Polarity | Tip positive with respect to ring |
Configuration | Electronically balanced |
Impedance | 40 kΩ (actual) |
Nominal Input Level | Switchable, +4 dBu, -10 dBV |
Maximum Input Level | +4 dBu: +22 dBu |
-10 dBV: +12.2 dBu | |
Pin Assignments | Tip=hot, Ring=cold, Sleeve=ground |
Phantom Power Protection | Up to 60 V DC |
Audio Output | |
Connector Types | 6.35 mm (1/4″) TRS |
Configuration | Electronically balanced |
Impedance | Connected directly to inputs |
P3R Wireless Bodypack Receiver | |
Active RF Sensitivity | (at 20 dB SINAD) 2.2 μV |
Image Rejection | >90 dB |
Adjacent Channel Rejection | >60 dB |
Intermodulation Attenuation | >50 dB |
Blocking | >60 dB |
Audio Output Power | 1 kHz @ <1% distortion, peak power, @32 Ω 80 mW (per output) |
Minimum Load Impedance | 16 Ω |
Headphone output | 3.5 mm (1.8″) stereo |
Net Weight | 98 g (3.5 oz.) (without batteries) |
Dimension | 110 × 64 × 21 mm H × W × D |
Battery Life (continuous use) | 5–7 hours, AA batteries |
SE112 Specifications | |
Sensitivity (1 kHz) (db SPL/mW) | 105 |
Impedance (Ω) | 16 |
Cable Length (cm) | 127 |
Sound Isolation (dB) | up to 37 dB |
MicroDriver | Single Dynamic |
Cable Type | Fixed |
Colours | Grey |
Sound Signature | Great sound for better listening |
Connection Type | 3.5mm |
Required Amplifier (Included) | n/a |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.