Teradek USB to 5pin Control Hub for Smart 7 Monitors

£139.99 £116.66

Order Now - Usually delivered in 2-4 weeks

SKU: TER-11-0895 Categories: ,

Teradek USB to 5pin Control Hub for Smart 7 Monitors

Teradek USB to 5pin Control Hub for Smart 7 Monitors (TER-11-0895).The USB to 5pin Control Hub for Smart 7 Monitors is an included piece of our Wireless Camera Control Kit for Teradek Bolt 4K and SmallHD Smart 7 monitors. Select this product if you already own a Wireless Camera Control Adapter.

Note: Wireless Camera Control Adapters for Bolt and a camera control license from SmallHD are required for use.

Specification

BOLT 4K LT HDMI – RX
VIDEO
Video Inputs N/A
Video Outputs 1x HDMI 1.4b Type-A receptacle
SDI Ancillary Data Support N/A
Colour Sampling YCbCr 4:2:2 10-Bit
Delay (TX to RX) RGB 4:4:4 8-bit
Supported Resolutions 4Kp23.98/24/25/29.97/30
1080p23.98/24/25/29.97/30/50/59.94/60
1080i50/59.94/60
720p50/59.94/60
480p50
576p59.94/60
480i(NTSC)/576i(PAL)
Input Cross Conversion N/A
Output Video Scaling N/A
VIDEO PROCESSING
Video Compression Visually lossless
Test Pattern Generator N/A
Spectrum Analyzer N/A
Colour Correction N/A
AUDIO
Audio Compression 48kHz 24-bit PCM
Audio Input N/A
Audio Output Embedded HDMI Audio Input (2 channel)
PHYSICAL ATTRIBUTES
Construction 4.8” x 3.7” x 1” (122 x 94 x 27mm)
Weight 10.3oz (292g)
Construction Milled aluminum (chassis) and regulation-compliant PCB
INTERFACES
Configuration Interface OSD with Menu, Joystick Navigation
Switches On/Off Switch
Desktop App Bolt Manager application for OSX & Windows
Mobile App Bolt App
USB Interface Upgrade via Micro-USB
5-pin Locking Connector CCU
Bluetooth Compatibility Yes
WIRELESS
Wireless DFS Frequencies:
5.270 ~ 5.670 GHz
Non-DFS Frequencies:
5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
Bluetooth 2.4 GHz
RF Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
RF power 17 dbm EIRP (1x external 2dBi antenna;
<51mW transmit power)
Antennas 5x External 2dBi antennas (included)
Range Up to 750 ft line of sight
Multicast Pair up to 4 transmitters per receiver
Noise Rejection Can coexist with Wi-Fi and 5GHz cordless phones, and can operate up to 6 sets in same location
Interoperability Can receive wireless video from all ranges of Bolt 4K XT and Bolt 4K LT transmitters (limited by shortest range device)
POWER
Power Input 2-Pin Circular locking connector 6-28 VDC
Battery None, optional Gold or V mount battery plate
Nominal Power Consumption 11 Watts
Operating Temperature 0~40 deg-C
GENERAL
Mountability Multiple mounting options with 3/8”x16 and 1/4-20” holes

What's Included

  • 1 x Bolt 4K LT HDMI 750 RX V-Mount
  • 1 x (Bit 118) 2pin Conn. to PowerTap – 18in Cable
  • 1 x USB 2.0 Type A Male to USB Type C Male – 1m Cable
  • 1 x Ultra Thin HDMI Male Type A (Full) – HDMI Male Type A (Full) 18in Cable
  • 1 x PSU 2pin Conn. to 18W AC Adapter (Int) – 6ft Cable
  • 5 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
  • 1 x Teradek Standard Terms and Conditions
  • 1 x Insert – Product Register
  • 1 x Insert – Bolt 4K Firmware Update
  • 1 x QR Code Insert – Bolt 4K LT 750 HDMI
  • 1 x Bolt 4K LT RX Battery Cover (Machined Anodized)
  • 1 x Screw Flat Head Phillips Black
  • 1 x (Bit 118) 2pin Conn. to PowerTap – 18in Cable

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Main Menu