£1,854.76 ex. VAT £2,225.71 inc. VAT

SKU: TVL-F-7H-MK2 Categories: ,


The F-7H mk2 is a 7’’ 1920×1080 resolution field monitor that offers max. luminance of 3,600nits with enhanced sharpness and peaking boost function via new image processing engine. While delivering the same high quality picture and professional features of the previous model, F-7H mk2 shows far less reflection with Anti-Glare film and faster access to frequent preset modes via front touch keys. The brightest 7-inch field monitor that offers 3,600nit maxiumn luminance and faster access to frequent preset modes via front touch key.

Audio Level Metre Display
Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Blue Only/ Mono
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Focus Assist
Assigns a colour to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay
Allows you to check the Blanking area and synchronise signals by displaying the horizontal and vertical intervals in the center of the screen.

H/V Flip
Allows the displayed image to be flipped horizontally or vertically. This feature provides flexible mounting options for camera operators.

Key Lock: Locks the knob or key control.

Luma(Y’) Zone Check
Displays the Luma(Y’) level of the input image in colours. Each pixel’s Y’ analysed and changed to a certain colour or zebra pattern according to the Index on the right side of the screen.

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Max Brightness On/Off
Displays the brightness increases from the normal up to max brightness to obtain a sharp and bright image when shooting outdoors.

Range Error
Analyses the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.

Time Code Display
Displays the Timecode information on the screen.

User Aspect
Adjusts the Width /Height display ratio.

Various Scan Modes
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope
Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

Magnifies the input signal from 0% to 90%.

Camera Lut.
Applies the LUTs to the outbound Log signal. A LUT for every major camera manufacturer has been included(LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4).

ARRI Alex Metadata over SDI
Takes the Metadata from the ARRI ALEXA is transported through the SDI outputs of the camera, and displays it on the monitor.

Split Zoom
Zooms the specified area sequentially.

Anamorphic Desqueeze
Supports several formats and resolutions that are ideally suited for anamorphic lenses and aspect ratios. When shooting anamorphic the image you are monitoring is an “unsqueezed” preview of what’s actually being recorded.

Sleep Mode
Sets the LUMINANCE to the minimum value when the time set in the still image output is exceeded.

Additional information


TV Logic






 Size 7″
 Resolution 1920 X 1080 (16:9)
 Pixel Pitch 0.078(H)x0.078(V)mm
 Color Depth 16.7M
 Viewing Angle 160°(H) / 160°(V)
 Luminance 3,6cd/m2
 Contrast Ratio 1,200:1
 Display Area 151.2(H)×94.5(V) mm
 1 X BNC 3G-SDI A Channel Input
 1 X HDMI HDMI Input
 2 X BNC 3G-SDI Output
 1 X HDMI HDMI Output
 Audio In Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out Analog Stereo (Phone Jack), Internal Speaker(Mono)
FPGA Functions
3G-SDI Level A/B,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  H/V Flip,  Key Lock,  Luma(Y’) Zone Check,  Marker,  Max Brightness On/Off,  Mono,  Range Error,  Time Code Display,  User Aspect,  Various Scan Modes,  Waveform/Vector,  Zoom,  Camera Lut.,  Arri Camera Metadata
Calibration3rd Party 3D LUT Import
Other Functions
 USB  Firmware update by USB cable
Firmware update by USB memory stick
 Conversion  HDMI-to-HDMI,  HDMI-to-SDI,  SDI-to-HDMI,  SDI-to- SDI,

Key Features

  • Audio Level Meter Display
  • Blue Only/ Mono
  • Focus Assist
  • H/V Delay
  • H/V Flip
  • Key Lock
  • Luma(Y’) Zone Check
  • Marker
  • Max Brightness On/ Off
  • Range Error
  • Time Code Display
  • User Aspect
  • Various Scan Modes
  • Waveform/ Vector
  • Zoom
  • Camera Lut
  • Arri Camera Metadata
  • Split Zoom
  • Anamorphic Desqueeze
  • Sleep Mode
  • Sharpness + Peaking Boost
  • Auto Flip

What's Included