Teradek Bolt 6 LT 750 Int Ant TX / RX – VM Set
£3,090.00 £2,575.00
Teradek Bolt 6 LT 750 Int Ant TX / RX – VM Set (10-2260-VII) is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies.
Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter.
The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments.
Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor.
Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates.
Comes With
- 1 x Bolt 6 LT 750 TX Internal Antenna
- 1 x Bolt 6 LT 750 RX Internal Antenna V-Mount
- 1 x 2pin to P-Tap Cable, 18in
- 1 x 2pin to AC Adapter 18W, 6ft
- 2 x Ultra Thin HDMI Male to Male Cable, 18in
- 2 x SDI Cable, 10in
- 1 x Lightstand Adapter 1/4-20in
- 1 x Hot Shoe Adaptor
- 1 x USB-C 2.0 Male to Male, 1m
Additional information
| BRAND | TERADEK |
|---|
Specification
Video:
Video Inputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
Video Outputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
Sdi Ancillary Data Support Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Colour Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Delay Tx To Rx <0.001sec
Input Cross Conversion Yes, HDMI to SDI (4Kp23.98-30 HDMI input is scaled and looped out as 1080p23.98-30 on SDI loopout)
Supported Resolutions:
Supported Resolutions 4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
Video Processing:
Video Compression Visually Lossless
Colour Correction None
Audio Processing:
Audio Compression 48kHz 24-bit PCM
Inputs:
Audio Input Embedded SDI/HDMI Audio Input (2 Channel)
Physical:
Dimensions 2.8″ x 4.7″ x 1.3″ (72mm x 119.8mm x 33.1mm)
Weight 7.5 oz (212 g)
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4″x20 and M3 holes
Interfaces:
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Mobile App Bolt App
Desktop App Bolt Manager application for OSX & Windows
Usb Interface Functionality Upgrade via Micro-USB
Bluetooth 2.4 GHz
Network:
Antennas 4x Internal 2dBi Antennas
Wireless DFS Frequencies: 5.270 ~ 5.670 GHz Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, and 5.945 ~ 6.425GHz
Rf Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
Rf Power 23 dbm EIRP
Range Up to 750 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Interoperability Compatibility Can transmit wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
Power:
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery None, optional Sony/Canon dual battery plate
Nominal Power Consumption 9 Watts
Environmental:
Operating Temperature 0-40℃
Bolt 6 LT 750 Int Ant RX:
Video:
Video Outputs 3G-SDI SMPTE 424M standard/75 Ω (BNC x 1), 1x HDMI 1.4b Type-A receptacle
Sdi Ancillary Data Support Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Colour Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Delay Tx To Rx <0.001sec
Output Video Scaling No (4Kp30 signals are output on HDMI, but scaled to 1080p30 and output over SDI. 4Kp60 signals received from Bolt 6 XT devices are scaled to 1080p60 and output over both HDMI and SDI outputs)
Supported Resolutions:
Supported Resolutions 4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
Video Processing:
Video Compression Visually Lossless
Test Pattern Generator Support Yes
Spectrum Analyzer Yes
Colour Correction None
Outputs:
Audio Output Embedded SDI/HDMI Audio Input (2 Channel)
Physical:
Dimensions 4.8″ x 4.2″ x 1″ (122.4mm x 106.2mm x 27.1mm)
Weight 10.7 oz (304 g)
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 3/8”x16 and 1/4-20” holes
Interfaces:
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Mobile App Bolt App
Desktop App Bolt Manager application for OSX & Windows
Usb Interface Functionality Upgrade via Micro-USB
Bluetooth 2.4 GHz
Network:
Antennas 4x Internal 2dBi Antennas
Wireless DFS Frequencies: 5.270 ~ 5.670 GHz Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, and 5.945 ~ 6.425GHz
Rf Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
Rf Power 21 dbm EIRP
Range Up to 750 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Interoperability Compatibility Can receive wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
Power:
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery V-Mount battery plate
Nominal Power Consumption 11 Watts
Environmental:
Operating Temperature 0-40℃
Reviews
There are no reviews yet.